dimensions in inches and (millimeters) kbl features ul recognized file # e-96005 ideal for printed circuit board reliable low cost construction high surge current capability high temperature soldering guaranteed: 260 o c / 10 seconds / 0.375? ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension leads solderable per mi l-std-202, method 208 maximum ratings and electrical characteristics rating at 25 o c ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20% type number symbol units maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified current @t a = 50 o c i (av) 4.0 a peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (jedec method ) i fsm 200 a maximum instantaneous forward voltage @ 2.0a @ 4.0a v f 1.0 1.1 v maximum dc reverse current @ t a =25 o c at rated dc blocking voltage @ t a =125 o c i r 10 500 ua ua typical thermal resistance ( note 1 ) r ja r jl 19 2.4 o c/w operating temperature range t j -55 to +125 o c storage temperature range t stg -55 to +150 o c note: thermal resistance from junction to ambi ent junction to lead with units mounted on p.c.b. at 0.375? ( 9.5mm ) lead len g th and 0.6? x 0.6? ( 16mm x 16mm ) co pp er pads. KBL4005-kbl410 single phase 4.0amp. silicon bridge rectifiers kbl 4005 kbl 401 kbl 402 kbl 410 kbl 408 kbl 406 kbl 404 http://www.luguang.cn mail:lge@luguang.cn
ratings and characteristic curves (kbl40 05 thru kbl4 10) fig.2- typical reverse characteristics per bridge element 0 20 40 60 80 100 120 140 percent of ra ted peak reverse vol t age. (%) tj=125 c 0 tj=25 c 0 fig.3- maximum non-repetitive for w ard surge current per bridge element peak for w ard surge current . (a) 10 1000 100 0 0 300 100 200 number of cycles a t 60hz fig.1- maximum for w ard current dera ting cur ve a verage for w ard current . (a) 0 50 100 150 0 1 3 2 4 5 ambient tempera ture. ( c) o fig.5- typical inst ant aneous for w ard characteristics per bridge element inst ant aneous for w ard current . (a) 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.01 0.1 1 10 inst ant aneous for w ard vol t age. (v) tj=25 c pulse width-300 s 2% duty cycle 0 inst ant aneous reverse current .( a ) fig.4- typical junction cap acit ance 1 2 5 10 20 800 100 1000 600 500 400 300 200 100 0 reverse vol t age. (v) 200 500 junction cap acit ance.(pf) tj=25 c 0 50 0.1 0.5 v ersion: a06 10 1 0.1 0.01 kbl4 005 -kbl4 10 single phase 4 .0 amp. silicon bridge rectifiers http://www.luguang.cn mail:lge@luguang.cn
|
